Autonomous cleaning

MT1 Autonomous AI sweeper for large areas

Sweeps fine dust and bulky debris in a single pass and works unsupervised shift after shift, with automatic charging at its station.

  • Performanceup to 1,800 m²/h
  • Cleaning width70 cm
  • Waste bin35 L
  • Battery life4-8 h
Autonomous PUDU MT1 sweeper in three-quarter view, showing its two front side brushes

RRP 14,900 €VAT not includedWith VAT (21%): 18,029 €

Buy now

Required accessory

Estación de carga MT1 y MT1 Max

Required for the MT1. Sold separately.

600 €

What is the MT1?

The MT1 is a robotic sweeper for dry cleaning of large indoor spaces: warehouses, factories, shopping centres or stations. Its dual-disc brushes pick up everything from fine dust to leaves and bottles, and its AI cameras locate debris for spot cleaning. It navigates autonomously using lidar SLAM and VSLAM, and returns on its own to charge.

  • Large and small debris

    The dual-disc brushes pick up leaves and bottles while sweeping fine dust and dirt at the same time.

  • AI debris recognition

    The cameras identify different types of debris in real time; in spot-cleaning mode it covers up to 6,000 m²/h.

  • Active dust control

    High-flow negative-pressure ventilation and a filter retain particles in the bin and prevent them from returning to the air.

  • Continuous operation

    Up to 8 h of battery life, charging in about 3 h, and automatic docking at the station to work in shifts.

Applications of the MT1

Scenarios where the MT1 fits in.

  • Warehouses and logistics
  • Manufacturing plants
  • Large DIY stores
  • Shopping centres
  • Public transport and airports

Technical specifications of the MT1

  • Dimensions (L × W × H)

    840 × 600 × 490 mm

  • Weight

    65 kg (presentation) / 74 kg (catalogue)

  • Method

    dry sweeping

  • Performance in full cleaning mode

    up to 1,800 m²/h

  • Performance in spot-cleaning mode

    up to 6,000 m²/h

  • Cleaning width

    70 cm

  • Brushes

    2 side disc brushes and a roller brush

  • Waste bin capacity

    35 L

  • Dust bag

    35 L, shared with the waste bin

  • Dust control

    negative-pressure ventilation and filter

  • Edge cleaning

    follows walls and corners

  • Recommended operating area (catalogue)

    indoor spaces from 500 to 25,000 m²

  • Maximum design area

    more than 100,000 m²

  • Debris recognition

    AI cameras with deep learning

  • AI modes (catalogue)

    magic cleaning

View the full technical sheet

Dimensions and weight

Dimensions (L × W × H)840 × 600 × 490 mm
Weight65 kg (presentation) / 74 kg (catalogue)

Cleaning

Methoddry sweeping
Performance in full cleaning modeup to 1,800 m²/h
Performance in spot-cleaning modeup to 6,000 m²/h
Cleaning width70 cm
Brushes2 side disc brushes and a roller brush
Waste bin capacity35 L
Dust bag35 L, shared with the waste bin
Dust controlnegative-pressure ventilation and filter
Edge cleaningfollows walls and corners
Recommended operating area (catalogue)indoor spaces from 500 to 25,000 m²
Maximum design areamore than 100,000 m²

AI functions

Debris recognitionAI cameras with deep learning
AI modes (catalogue)magic cleaning, spot cleaning, adaptive cleaning, smart recharging, heat map and guided cleaning

Mobility and navigation

NavigationVSLAM + markers + lidar SLAM
Cruising speed0.2 to 1.2 m/s (adjustable)
Minimum passage width75 cm
Maximum obstacle height20 mm
Passable gaps35 mm

Sensors

Lidar1
VSLAM camera1
RGBD cameras3
RGB cameras2
Line laser2
Otherfill light and bumper sensor

Battery and charging

Battery capacity45 Ah
Battery life4-8 h depending on cleaning level
Charging time< 3 h (catalogue: approx. 3 h)
Chargingautomatic docking at the charging station

Interface and handling

Display10 inches
Controlspower button and emergency stop button
Manual handlingextendable steering handlebar
Maintenancequick-release modular bin and consumables

Connectivity

IoTelevator control and electronic door modules for working across multiple floors
MonitoringPUDU Link app and PC interface with cleaning reports and full-bin alerts

Accessories and consumables

Charging stationyes
Consumablesside brush, sweeping roller brush, rubber roller brush and removable roller brush
Filterhigh-efficiency H11/H13

Gallery of the MT1

  • Sweeping sand and bottles in a production plant
  • Manual movement using the extendable handlebar
  • 35 L waste bin removed from the robot
  • Spot cleaning of debris detected by the camera in a warehouse
  • Moving along a warehouse aisle